VER SALES, INC.

Hydraulic Cutters

HYDRASHEAR® Models W-075, P-1125 & C-1750

The self-contained hydraulic cable cutter is a precision engineered tool designed to give a clean cut with minimum effort. Just pump the handle...no outside power is required. This self-contained portable tool can be easily carried and is used by contractors, rigging lofts and elevator repairmen. All three models will operate under water. The Pell HYDRASHEAR® is recommended by wire rope manufacturers and used by industries throughout the world. The blades and die sets are made of the finest tool steel available, heat treated and ground to close tolerances. This means a long life for the blades as well as superior performance. The hydraulic cutters are available in three sizes and capacities. The Model W-075 has a 3/4" capacity, the Model P-1125, a 1-1/8" capacity and the Model C-1750 has a 1-3/4" capacity.





HYDRASHEAR® Models POC1125, POC1750 & POC2500

The power operated cutters require an external hydraulic power source for operation. These models can be activated by any electric, gasoline, hand, battery or air operated hydraulic pump capable of developing 10,000 PSI and having free flow return through the pressure line. The pumps are hose-connected to the HYDRASHEAR body. The power operated cutters are available in three sizes and cutting capacities. The Model POC1125 has a 1-1/8" capacity, the Model POC1750, a 1-3/4" capacity and the Model POC2500 a 2-1/2" capacity.





Model "S" HYDRASHEAR®

Designed for Cutting:

1/2" Prestressed Concrete Strand

1/2" Mild Steel Round Chain

5/8" Reinforcing Bar

5/8" Bolts

Model "S" HYDRASHEAR® -- As illustrated with a pistol grip, this tool is convenient to use at any angle and weighs less than 12 pounds. It requires an external hydraulic power source for operation and can be activated by any electric, gasoline, hand battery or air operated hydraulic pump capable of developing 10,000 PSI and having free flow return through the pressure line. The front blade may be adjusted to proper cutting clearance after resharpening. The rear blade has a fixed travel length, which cannot be adjusted. The front blade can be adjusted so that proper clearance between the blade may be maintained. NOTE: Please specify if the Model "S" is to be used for cutting round chain - a modification of the cutting head is necessary for this purpose.