Mooring Master D-7 Mooring Master P-7 Static Rope Duravet

Mooring Master D-7

The braided core strength members are produced from ultra high molecular weight polyethylene (UHMWPE) fibers that are covered by a braided nylon chafe protection cover. This product floats and has strengths higher than wire rope while being flexible and hand spliceable. It is the lowest stretch, highest strength rope available that floats.

Characteristics:

Low stretch at maximum strength
Flexibialty with firm cross section
Fully protected strength members
Lightweight Non-rotational

Applications:

Ship Mooring Lines
Deep Water Mooring Lines
Tug Assist Lines
Face and Wing Wires
Wire Rope Replacement

Fiber Content: UHMWPE and Nylon Fiber

Specific Gravity: 1.02

Elastic Elongation at Percentage of Break Strength:

10% 20% 30%
0.47 0.78 1.07

Water Absorption Fiber: 1%

Size Weight
Dia. Inch Dia. MM Circ. Inch Circ. MM Lbs. per 100 ft. Kg. per 100M Avg. Strength Min. Strength
lbs. kg. lbs. kg.
1" 24 3" 72 19.30 28.72 112,600 51,075 95,700 43,410
1-1/8" 28 3-1/2" 84 24.18 35.98 140,800 63,867 119,700 54,296
1-1/4" 30 3-3/4" 90 28.88 42.98 169,000 76,658 143,700 65,182
1-1/2" 36 4-1/2" 108 38.65 57.52 225,300 102,196 191,500 86,864
1-5/8" 40 5" 120 43.51 64.75 253,400 114,942 215,300 97,705
1-3/4" 44 5-1/2" 132 50.67 75.41 295,600 134,084 251,300 113,990
1-7/8" 45 5-5/8" 135 59.21 88.12 344,900 156,447 293,200 132,996
2" 48 6" 144 67.61 100.62 394,200 178,809 335,100 152,001
2-1/8" 52 6-1/2" 156 76.08 113.22 443,500 201,172 377,000 171,007
2-1/4" 56 7" 168 86.93 129.37 506,800 229,884 430,800 195,411
2-3/8" 57 7-1/8" 171 96.64 143.82 563,100 255,422 478,600 217,093
2-1/2" 60 7-1/2" 180 106.26 158.14 619,500 281,005 526,600 238,866
2-5/8" 64 8" 192 115.96 172.57 675,800 306,543 574,400 260,548
2-3/4" 68 8-1/2" 204 126.82 188.73 739,100 335,256 628,200 284,952
2-7/8" 69 8-5/8" 207 137.68 204.90 802,500 364,014 682,100 309,401
3" 72 9" 216 152.23 226.55 886,900 402,298 753,900 341,969
Back To Top

Mooring Master P-7

Mooring Master P-7 construction is produced from high tenacity polyester fiber for the seven braided strength cores and braided chafe protection cover. It offers extremely high strength while allowing an excellent deep water mooring profile or higher shock mitigation than HMWPE fiber ropes. Based on its strength and built-in wear protection,
P-7 enables smaller diameters to be used to replace standard polyester rope constructions thereby minimizing weight.

Characteristics:

Low stretch at maximum strength
Flexibialty with firm cross section
Fully protected strength members
Lightweight Non-rotational

Applications:

Ship Mooring Lines
Deep Water Mooring Lines
Tug Assist Lines
Face and Wing Wires
Wire Rope Replacement

Fiber Content: Polyester Fiber

Specific Gravity: 1.38

Elastic Elongation at Percentage of Break Strength:

10% 20% 30%
0.96 1.84 2.82

Water Absorption Fiber: 3% to 5%

Size Weight
Dia. Inch Dia. MM Circ. Inch Circ. MM Lbs. per 100 ft. Kg. per 100M Avg. Strength Min. Strength
lbs. kg. lbs. kg.
1-1/2" 36 4-1/2" 108 54.82 81.58 100,580 45,623 85,493 38,780
1-5/8" 40 5" 120 63.91 95.11 117,340 53,225 99,739 45,242
1-3/4" 44 5-1/2" 132 74.46 110.81 136,900 62,098 116,365 52,783
1-7/8" 45 5-5/8" 135 85.09 126.63 156,460 70,970 132,991 60,325
2" 48 6" 144 91.25 135.80 167,630 76,037 142,486 64,631
2-1/8" 52 6-1/2" 156 109.42 162.84 201,160 91,246 170,986 77,559
2-1/4" 56 7" 168 123.12 183.23 226,300 102,650 192,355 87,252
2-3/8" 57 7-1/8" 171 136.91 203.75 251,450 114,058 213,733 96,949
2-1/2" 60 7-1/2" 180 152.08 226.33 279,380 126,727 237,473 107,718
2-5/8" 64 8" 192 167.24 248.89 307,320 139,400 261,222 118,490
2-3/4" 68 8-1/2" 204 182.49 271.58 335,260 152,074 284,971 129,263
2-7/8" 69 8-5/8" 207 197.74 294.28 363,200 164,748 308,720 140,035
3" 72 9" 216 216.68 322.46 398,120 180,587 338,402 153,499
Back To Top

Static Rope

A firm body flexible kern mantle construction designed to meet the demands of rescue, rappelling, and specialty rigging operations. It is a balanced non-rotational rope with a high tenacity solution dyed braided polyester cover over a heat stabilized nylon core. Static rope is designed to equal or exceed the 1983 NFPA standard for one and two-person rescue ropes.

Characteristics:

Excellent wear resistance
Good shock mitigation
Maintains firm round shape when working
High strength to weight ratio

Applications:

Rescue Lines
Rappelling Lines
Specialty Rigging Lines

Fiber Content: Polyester and Nylon Fiber

Specific Gravity: 1.24

Water Absorption Fiber: 3% to 5%

Elastic Elongation at Percentage of Breake Strength:

Load 3/8" 7/16" 1/2" 5/8"
200 lbs 1.7% 1.2% .8% .5%
450 lbs 3.5% 3.0% 2.2% 1.3%
900 lbs 5.9% 5.1% 4.1% 3.0%

Size Weight
Dia. Inch Dia. MM Circ. Inch Circ. MM Lbs. per 100 ft. Kg. per 100M Avg. Strength
lbs. kg.
3/8" 9 1-1/8" 27 4.5 6.7 5,700 2,586
7/16" 11 1-1/4" 33 6.5 9.7 7,800 3,538
1/2" 12 1-1/2" 36 8.2 12.2 10,000 4,536
5/8" 16 2" 48 12.0 17.9 13,500 6,124
Back To Top

Duravet

An extremely firm and stiff rope I construction produced with high tenacity polyester fiber. Duravet™ has a parallel core of filament polyester with a tightly braided polyester cover which makes it suitable for crimped sleeve connectors. This high strength and low stretch product is primarily used in concrete soil erosion mats. The stated strengths are rope strengths and do not reflect termination efficiency. The wear resistance, firm construction, mechanical termination capability, light weight and non-corrosion make it an alternative to wire rope.

Characteristics:

High strength to weight ratio
Diameter tolerance ± 2%
Low stretch
Non-corrosive

Applications:

Soil Erosion Mats
Oil Boom Containment Rope
Terristrial Anchoring Lines

Fiber Content: Polyester Fiber

Specific Gravity: 1.38

Elastic Elongation at Percentage of Breake Strength:

10% 20% 30%
0.6 1.4 2.2

Water Absorption Fiber: 3% to 5%

Product Code Size Weight Per 100 ft. Average Break lbs. Put-up
(feet per reel)
mm (Circ.) Inches (Dia.) Fraction of Inches (Dia.)
292-240 19 1/4" 0.240 2.20 3,100 1,000
292-250 20 1/4" 0.255 2.70 3,700 7,000
292-280 22 1/4" 0.280 3.00 4,500 6,000
292-290 24 1/4" 0.295 3.30 5,100 5,000
292-310 27 5/16" 0.320 4.40 7,000 4,000
292-380 30 3/8" 0.380 5.50 10,000 3,000
292-500 40 1/2" 0.500 9.70 15,000 2,000
Back To Top

© VER SALES, INC. 2005
All Rights Reserved
.