Assorted Hooks

Sliding Choker Hooks

  • Forged alloy steel through 3/4"
  • Cast alloy steel 7/8" through 1-1/2"
  • Wide throat to take heavy thimbles
Single Part Rope Size Eight Part Rope Size Safe Working Load*
(Pounds)
Dimensions in Inches Weight in Pounds Each
A C E L
3/8 - 2,500 2-1/16 5/8 5/8 4-9/32 .88
1/2 1/8 3,300 2-1/4 3/4 25/32 4-31/32 1.25
5/8 3/16 5,000 3-1/16 3/4 or 1 15-16 6-3/8 2.93
3/4 1/4 8,000 3-1/8 1 or 1-7/16 1-5/32 7-21/32 5.17
7/8 - 1 3/8 15,000 4-1/2 1-1/4 or 2 1-5/8 9-1/2 16.5
1-1/8 - 1-1/4 7/16 23,000 5-5/8 2-5/16 1-3/4 11-5/8 26.5
1-3/8 - 1-1/2 1/2 - 9/16 30,000 7 2-13/16 2-3/16 14-1/2 42.00
* Ultimate Load is 5 Times Safe Working Load.
When Ordering, Eye diameter ("C") Should Be Specified.

Snap Hooks

  • Pressed steel latches and stainless steel springs, bolts and nuts.
  • Safe working loads shown are based on ultimate load that is 4 times the safe working load.
Hook Size (Inches) Safe Working Load (Pounds) Inside Diameter of Eye (Inches) Throat Opening (Inches) Length Overall (Inches) Weight in Pounds Per 100
7/16 750 3/4 3/4 3-15/16 23.25
9/16 1,000 1-1/8 13-16 4-3/4 48.25

Replacement Hook

  • Easily attached to any hoist with welded link load chain and roller chain or wire rope with suitable end fitting
  • Spring latch, latch bolt with self locking nut - stainless steel. Nuts cadmium plated brass.
  • For chain and electric hoists with swivel jaw-forged.
Size Hoist Width Between Jaws (Inches) Diameter Bolt (Inches) Overall Length (Inches) Throat Opening (Inches) Weight in Pounds Each
1/2 Ton 9/16 3/8 6-1/8 31/32 1.36
1 Ton 11/16 7/16 7-11/16 1-1/8 2.55

Sorting Hook

  • Deep straight throat permits efficient handling of flat plates of large cylindrical shapes.
  • The long tapered point allows easy grab in rings, pear links, eye bolts of lifting holes.
  • Ultimate load is 5 times the safe working load.
Safe Working Load at Tip Safe Working Load at Bottom of Hook Overall Length I.D. of Eye Opening at Top of Hook Radius at Bottom of Hook Weight Pounds Each
2 Ton 7-1/2 Ton 9-11/16" 1-3/8" 2-13/16" 5/8" 6

Pedro or Sling Hook

Dimensions:
Inside of Eye: 3/4" or 1"
Outside Diameter of eye: 2-1/2". Throat of Hook: 7/8"
Thickness of Hook: 1"
Overall Length: 5-3/4"
Weight Each: 2-1/2 lbs.
Inside Diameter of Eye (Inches) Ultimate Load (Tons)
3/4 10
1 10
Note: Pedro hooks are furnished in two sizes 3/4" and 1" inside diameter.
When ordering specify the size required

Barrel Hooks

Forged Galvanized or Self Colored
I.D. of Eye O.D. of Eye Overall Length Width of Lip Weight Per Pair Safe Working Load
1-9/16" 2-13/16" 5" 2-7/8" 3-1/4 lbs. 1 Ton

© VER SALES, INC. 2011
All Rights Reserved
.