Jeamar Snatch Blocks






Jeamar steel sheaves are precision made from the highest quality fine-grain steel. They're tough, hassle free and they last longer.


The strength of the steel used by Jeamar considerably exceeds that of cast iron. Steel also has a weight saving advantage of up to 50 percent over cast iron, resulting in easier handling and installation.


Jeamar steel sheaves ensure that the shape of your rope is maintained under normal load conditions.


With a minimum sheave to rope ratio of 15:1, the ropes bending stress is reduced for longer life.


Rope grooves are hardened during forming, increasing the life of sheave and rope.


Taper roller bearings with a high side load capacity are standard in Jeamar snatch blocks. These bearings overcome the side loads imposed during the initial tensioning of the wire rope, extending the life and increasing the efficiency of the snatch block.

The drop side is secured by a simple non-removable attachment with an additional 'secure pin'. The design allows the rope to be installed and removed quickly and easily.

Important: Due to Jeamar's policy of continuing development, all specifications are subject to change without notice. Users of these products are responsible for ensuring their suitability for the application in which they are being used.

Back To Wire Rope Block Index

© VER SALES, INC. 2011
All Rights Reserved
.